Anterior Total hip replacement - A hip replacement surgery with Zero precautions. A hip replacement which can get you back to a completely pain-free life with normal walking. The biggest problem with old techniques of hip replacement are 1. 4 percent patients have high chances of hip dislocation (hip ball coming out & where resurgery is needed to fix). In order to prevent it, patients are adviced multiple precautions & restrictions sometimes for lifetime. 2. The other major problem is unequal length of legs after hip replacement. Leading to permanent abnormal walking & limp. With Anterior total hip replacement both the above issues can be easily managed. With Direct Anterior(surgery from front) Total Hip replacement, patients have the following advantages- 1. Both legs will be completely equal in length- since pt is positioned straight on table & comparison with computerized arm while operating making comparison to the opposite leg easier helping in getting completely equal legs. In other technique like posterior or anterolateral since patient is placed on side, legs end up being unequal since comparison is not possible with opposite leg at all. Even imaging is not possible. 2. Minimal muscle pain due to minimally invasive -mis technique. The entire surgery is performed with an incision of around 10 cms & zero muscle damage. 3. Zero precautions after surgery leading to stress free life. . Patients can sit on floor/use Indian Toilets without worrying about chances of hip dislocation. In older techniques patients are told to follow precautions for atleast 3 months & sometimes even lifetime. 4. No restriction in Sexual activities. 5. Patients have quick recovery due to less pain & can even walk without walker with full weight bearing within 1-2 days. With older techniques, patients still have to use walker or wait upto 1.5 months to put weight & walk. 6. A small 10 cm line incision which gets hidden in groin crease & becomes just like a thin pencil mark in 2-3 months. With Direct Anterior Total Hip replacement, pts can even get Both total hip replacements performed in a single sitting. Even the choice of implants cemented or uncemented & can be dual mobility, ceramic on ceramic , ceramic on poly or metal on poly as per patients preference. Anterolateral & Posterior hip replacement - Both are older techniques of total hip replacements where patients are adviced multiple precautions after surgery. Older techniques posterior/anterolateral (incision of surgery from back- posterior & surgery from side - anterolateral) total hip replacements have limitations such as patients are adviced not to sit on floor or do any activity on ground because of risk of hip ball dislocation & even where patients end up having unequal leg lengths after surgery. Multiple research papers have proven Direct Anterior Hip replacement has significant advantages. In The US, Hip replacement by Direct Anterior technique is preferred by most of the patients due to its significant advantages. Though Direct Anterior Hip replacement technique has excellent advantages, it can be performed in obese patients with weight more than 130 kgs only after proper assessment. We regularly have patients visiting from various parts of the country for Total Hip replacement with Direct Anterior Technique be it cases of hip avn, ankylosing spondylitis or post traumatic hip failure. We have numerous patients from all over the country visiting our centre in Indore & Mumbai who have been suffering from Hip issues & have undergone Total Hip Joint Replacement by Direct Anterior technique. For your benefit, please see the explanation & results regarding anterior hip replacement on our YouTube page- TheJointSurgeon https://youtube.com/@TJSJoints https://youtu.be/mC-Sd52dxsw https://youtu.be/jAKbalLIL4A https://youtu.be/Y3cyQRl5v_U If you are suffering from hip joint issues & need a hip replacement, Anterior Total Hip replacement is the best technique for you to be pain free & walk completely normally. We can help you. For more details or appointment please feel free to contact us. +91 7760547341

A standard total shoulder replacement depends upon muscles and tendons around the shoulder joint to be intact. These muscles and their tendons function to move the shoulder and are together called the rotator cuff. When these tendons become extensively torn so that they do not attach to the bone any longer, the shoulder often does not function normally. The loss of the rotator cuff can produce pain and also loss of motion. A normal shoulder replacement is designed to work only if those tendons are intact. Reverse Shoulder Replacement (Arthroplasty) has emerged as a very attractive alternative for patients with cuff-tear arthropathy, selected proximal humerus fractures and nonunions. Its indications continue to expand, especially for revision surgery. REVERSE SHOULDER ARTHOPLASTY Reverse shoulder arthroplasty is an attractive option in patients. Since this kind of shoulder replacement does not rely on the function of the rotator cuff, it provides predictable results in terms of pain relief and shoulder function in one operation. The results of reverse shoulder replacement are fairly predictable and good especially in patients suffering from chronic shoulder joint problems since the function of the joint is less dependent on healing of the tuberosities. The main reason to consider a reverse prosthesis is when there is arthritis of the shoulder joint and the rotator cuff tendons are torn or gone. This is the most common surgical indication for a patient considering a reverse prosthesis. In this situation this operation will give the patient significant pain relief and may also help with range of motion of the shoulder. Another reason to have a reverse prosthesis is if the rotator cuff tendons are all torn and one cannot lift the arm high enough to function. Typically in this case the shoulder is not painful but the inability to lift the arm is very disrupting to the ability to function in life. When the patient goes to lift the arm there is a prominence on the front of the shoulder, and this is called an anterior-superior migration or subluxation of the shoulder. In these cases pain may or may not be a major factor for the reverse prosthesis, but the main reason for the replacement is to regain motion and function. The third most common reason to have a reverse prosthesis is if the shoulder has already had a replacement prior to the time a reverse prosthesis was available and the patient still has pain and loss of motion. Sometimes the regular shoulder replacement was placed for a fracture or for torn rotator cuff tendons and the shoulder continues to be painful. In this case, if a reverse prosthesis is needed, the surgery to place a reverse prosthesis is a little more complicated. The reason for this is that the first, more traditional shoulder replacement has to be removed at the time of surgery, and the reverse can then be placed in the shoulder. Other reasons to have a reverse prosthesis are some fractures of the shoulder area, particularly ones that involve the proximal humerus (arm bone) where the ball attaches to the shaft of the bone. In some instances, the bone is broken into many pieces or the ball may be split into parts. The last reason to have a reverse prosthesis is because of a tumor in the proximal humerus that involves the bone of the shaft of the bone or the ball of the humerus itself PRE-OPERATIVE STEPS Every effort is made to assess the patient prior to surgery in order to ensure safety of the patient for the elective procedure. 1. After admission, routine blood work-up will be done prior to surgery. Depending on the age of the patient and other premorbid conditions, other investigations such as Echocardiography may be performed in elderly patients. 2. All the investigations prior to surgery are performed in order to ensure that the surgical procedure can be safely tolerated by the patient, since shoulder arthroscopy is an elective procedure. If any risk is involved, the patient/ attendants will be informed so. 3. Blood transfusion though rarely required, may be done depending on the reports. 4. X-rays and MRI will be done ideally in order to guide the surgical plan and the prognosis. 5. Surgical consent will be explained to the patient detailing the procedure as well as the risks involved, if any. INTRA-OPERATIVE STEPS 1. The patient is positioned in a beach chair position. 2. For this procedure the deltopectoral approach is normally used. 3. It is crucial to evaluate the fracture. The fracture lines are identified as well as the long head of the biceps and the condition of the rotator cuff. 5. The biceps tendon is temporarily attached to the superior border of the pectoralis muscle. A tenotomy of the long head of the bicipital tendon close to the rotator interval is performed. 6. The glenohumeral joint is opened through the fracture. 7. Preparation of the joint for placement of prosthesis is performed. 8. A complete soft-tissue release around the glenoid is performed. 9. The guide plate is placed on to the glenoid surface so that it is flush with the circle of the lower glenoid . The guide plate is fixed with a central K-wire. 10.A cannulated glenoid resurfacing reamer is used to remove the cartilage and to create a smooth surface of the glenoid to provide full contact with the base plate. 11.The glenosphere is implanted. A trial glenosphere may be used instead of the definitive one. 12. The intramedullary canal is prepared with reamers of increasing diameters. 13. The humeral trial prosthesis is inserted as determined by the size of the last reamer. 14. Reduce the prosthesis and confirm proper joint tension and stability. Do not overtension the deltoid muscle. Check if there is any unwanted impingement. 14. After hardening of the cement, reduce the prosthesis. Confirm correct soft-tissue tension and stability. POST OPERATIVE PHASE Care after surgery: • Wear your sling or brace at all times for as long as directed. This helps to remind you not to use the arm. It also allows your shoulder to heal and decreases pain. • Apply ice on your shoulder for 15 to 20 minutes every hour or as directed. Use an ice pack, or put crushed ice in a plastic bag. Cover it with a towel. Ice helps prevent tissue damage and decreases swelling and pain. • Place a small pillow or towel behind your elbow when you lie on your back. This keeps your shoulder in proper position. You may need to sleep in an upright position if you cannot sleep on your back. Place 2 to 3 pillows lengthwise behind your back when in bed. Make sure the pillows do not move your shoulder forward. Instead, you can sleep in a reclining chair. • Avoid moving your shoulder. Do not stretch or shrug your shoulder. Do not do exercises on your own until your healthcare provider says it is okay. • Do not lift with your hand on your surgery side. You put pressure on your shoulder muscles when you lift. • Do not lean on the hand of your surgery side. Pressure will cause pain and may cause damage to your shoulder. • Do not drive until your healthcare provider says it is okay. Shoulder bandage care: Keep your dressing clean and dry. Your healthcare provider will tell you when it is okay to take a bath or shower. Once you are able, let soap and water run over your surgery area. Do not scrub the area. Pat the area dry and put on a clean bandage as directed. Pain Management • Some amount of pain is expected after the surgical procedure. • Ice packs can be used for pain reduction • Paracetamol or Nsaids can be considered for pain management especially during the first four weeks. Shoulder rehabilitation protocol The shoulder is perhaps the most challenging joint to rehabilitate both postoperatively and after conservative treatment. Early passive motion according to pain tolerance can usually be started after the first postoperative day. The program of rehabilitation has to be adjusted to the ability and expectations of the patient and the quality and stability of the repair. The full exercise program progresses to protected active and then self-assisted exercises. The stretching and strengthening phases follow. The ultimate goal is to regain strength and full function. Activities of daily living (ADL) can generally be resumed while avoiding certain stresses on the shoulder. Mild pain and some restriction of movement should not interfere with this. The more severe the initial displacement of a fracture, and the older the patient, the greater will be the likelihood of some residual loss of motion. Generally, shoulder rehabilitation protocols can be divided into three phases. Gentle range of motion can often begin early without stressing fixation or soft-tissue repair. Gentle assisted motion can frequently begin within a few weeks, the exact time and restriction depends on the injury and the patient. Resistance exercises to build strength and endurance should be delayed until bone and soft-tissue healing is secure. This may need to be adjusted for each patient. Phase 1 (approximately first 6 weeks) Bandage • Immobilization on a shoulder abduction pillow in neutral position of rotation Range of motion • Passive motion within the pain free interval for abduction, adduction and flexion • No internal or external rotation • Shoulder joint motion up to 90° • ADL for eating and writing allowed Physiotherapy • Passive motion up to 90° • Relaxation/stretching of neck muscles • Training of elbow and hand functions • Specific stabilization therapy for the shoulder joint • Isometric exercises in all directions • CPM up to 90° of abduction Massage • Neck • Shoulder girdle • Thoracic spine Training therapy • Training of the contralateral arm (overflow cardiovascular training) Phase 2 (approximately week 7-11) Bandage • No longer required Range of motion • Assisted/active motion within the pain free interval, also beyond 90° • Careful rotation Physiotherapy • Free motion of shoulder girdle (scapula, clavicle, cervicothoracic junction, cervical and thoracic spine) with specific mobilization • Strengthening exercises especially for ADL • Eccentric muscle activity Massage • As required Ice/warmth • As required Training therapy • Mobilization bath, wound permitting • Training of hand and forearm muscles • Set for shoulder therapy Phase 3 (after week 11) Range of motion • No restrictions on Shoulder movement • Muscle growth for shoulder girdle and all arm muscles Physiotherapy • All physiotherapeutic techniques allowed, active and against resistance • Increasing eccentric muscle activity Training therapy • Handcycling • Training for specific ADL and sports • Machine training • Free weight training

There are four different muscles that stabilize the ball and socket that make up the shoulder joint. These muscles are responsible for arm movement and shoulder stability. Through repeated heavy lifting, incorrect posture the tendons which attach muscles to bone may injure and tear. The muscles forming the part of the rotator cuff are Supraspinatus, Infraspinatus, Teres minor as well as Subscapularis, although the most common tear is of the tendon of Supraspinatus muscle. Torn Rotator Cuff Signs and symptoms include: • Pain and weakness with overhead movements • Pain with putting on and taking off clothes • Pain with reaching behind the back when showering • Pain with lying on the painful shoulder • Difficulty performing physical activity or even job duties It’s not uncommon for people with a rotator cuff tear to feel the following: • Increased pain in the shoulder with lifting or during overhead activities. • Inability to fully lift arm due to weakness of the shoulder muscles. • Pain in the shoulder at night, keeping them from sleeping • Pinching, catching, or popping sounds in the shoulder with movement • Restricted range of motion, especially with reaching behind the back or overhead Though most often rotator cuff tears are of traumatic origin, degenerative tears with increasing age are equally common and should be considered for repair too in symptomatic patients. Rotator cuff tendon tears are ultimately confirmed through Magnetic Resonance Imaging (MRI). A rotator cuff repair is a surgery to restore the muscle tendon attachment to the humeral head (the ball of the ball and socket shoulder joint). It is most often done today through an arthroscopic technique – small incisions around the shoulder. PRE-OPERATIVE STEPS Every effort is made to assess the patient prior to surgery in order to ensure safety of the patient for the elective procedure. 1. After admission, routine blood work-up will be done prior to surgery. Depending on the age of the patient and other premorbid conditions, other investigations such as Echocardiography may be performed in elderly patients. 2. All the investigations prior to surgery are performed in order to ensure that the surgical procedure can be safely tolerated by the patient, since shoulder arthroscopy is an elective procedure. If any risk is involved, the patient/ attendants will be informed so. 3. Blood transfusion though rarely required, may be done depending on the reports. 4. X-rays and MRI will be done ideally in order to guide the surgical plan and the prognosis. 5. Surgical consent will be explained to the patient detailing the procedure as well as the risks involved, if any. INTRA OPERATIVE STEPS 1. After anesthesia induction and patient positioning your surgeon will make two small incisions in the front and one small incision each in the back and the side of the shoulder joint. 2. The surgery is performed using a small fiberoptic camera (an arthroscope) and other small instruments inserted through the incisions. 3. The fatty tissue which is leading to symptoms of bursitis is removed along with a burr thinning of undersurface of the acromion bone is performed which is known to cause rotator cuff tears. 4. The remaining portion of the torn rotator cuff muscle tendon is mobilized after clear visualization through the arthroscope. 5. After mobilization, suture anchors are inserted into the underlying humerus bone. 6. The tendons are fixed to suture anchors with the help of a device known as Firstpass. 7. Once sufficient hold is obtained in the tendons, knots are applied in order to fix the tendon into the original insertion site on the bone. 8. Once the rotator cuff tendons are firmly in place, the incisions are then closed with small bandages and the surgery is complete. POST OPERATIVE STEPS After surgery, patients will take home a sling used to protect the arm and the newly repaired tendons. Patients need to wear the sling for the first 6 weeks even during sleep. Patients may take the sling off when bathing or performing physical therapy exercises. DON’Ts for the first 6 weeks: • Don’t lift your surgical arm overhead without help • Don’t reach behind your back • Don’t pick up any heavy objects with the surgical arm • Don’t push or pull any objects with the surgical arm • Don’t perform any chores or physical labor requiring the use of your surgical arm Pain Management after Shoulder Surgery Most patients with rotator cuff repair will have some level physical discomfort which is normal. The pain could be sharp when first attempting to move the arm. Most surgeons will prescribe medications which should be taken to reduce pain but the patient should continue with the rehabilitation program. Ice is helpful to reduce inflammation and improve pain in the initial recovery process. Place an ice pack or cold compress over the shoulder for up to 20 minutes several times a day especially when recovering the first few weeks. Some pain and inflammation are normal for routine healing. However, some things may be concerning and require further attention. Watch out for: • Active drainage or pus from the wound after 3 weeks, the incision sites should be closed by this point. • Swelling and stiffness in the hand/wrist/elbow – this may mean that you have some limited lymphatic drainage; try elevating the arm on some pillows when you sit and performing some hand/finger exercises • Severe unresolved pain in the shoulder joint after 6 weeks Rehabilitation after Rotator cuff repair Rotator Cuff Exercises for Weeks 1 – 6 Physical Therapy will be vital to facilitate recovery and provide the best guidance. For the first 6 weeks, patients need to refrain from any aggressive movement or weight lifting. Initial Physical Therapy sessions are very important for preventing injury and for gradual restoration of movement. In the first several sessions, the therapist will perform the arm movements for the patient (passive motion) so as not to strain any of the repaired muscles and tendons Pendulums • Brace against a supportive surface (like a kitchen counter or dining table) • Allow the surgical arm to hang down with just the weight of the arm • Move your body back by bending your knees until the arm begins to swing around passively • Go clockwise, then counterclockwise • Perform 2 sets of 20 repetitions Table Slides • Rest your hand and forearm on a towel placed in front of your dining table • Lean forward with your body and allow your arm to move forward until you feel a gentle stretch and hold at the end for 5 to 10 seconds • Keep your shoulders relaxed, do not shrug your shoulders • Perform 3 sets 10 reps Shoulder Flexion passive range of motion • Lie on your back • Using the strength of your non-surgical arm, bring your surgical arm overhead, hold at the end for 5 to 10 seconds • Keep your shoulders relaxed, do not shrug your shoulders • Perform 3 sets 10 reps Shoulder External Rotation passive range of motion • Lie on your back, with your surgical arm’s elbow by your side • Hold a lightweight stick with both hands • Using the strength of your non-surgical arm, rotate your surgical arm outwards into a gentle stretch • Hold at the end for 5 to 10 seconds • Keep your shoulders relaxed, and keep your elbow by your side • Perform 3 sets 10 reps Your physical therapist may also direct you to work on improving your wrist/elbow and grip strength. Rehab 6 to 12 weeks post-op Most patients will discontinue wearing the sling after week 4 to 6. This will also be the time in which patients will begin moving the arm, first with some help (therapists call this “active assisted” range of motion), then progressing independence with movement (“active”). Shoulder Exercise for Weeks 6 to 8 Active Assistive Exercises (Flexion, Abduction, External Rotation) The goal is to gradually get your surgical shoulder to move with support from your other arm. • With both hands, hold onto a stick • Using the help of the good arm, push your surgical hand: • Straight up and forward (flexion) • Up to the side (abduction) • With your elbow by your side, rotate the arm (external rotation) • When first starting, use your good arm to push most of the weight, then gradually do more with the surgical arm granted there is no pain • Perform 3 sets 10 reps holding for 5 seconds. Flexion with stick Abduction with Stick External Rotation with Stick Isometrics • With your elbow by your side, press a towel with your fist into the wall in each of these directions gradually until muscle activation is felt in the shoulder • Perform 3 sets 10 reps holding for 5 seconds Shoulder Exercises Week 8 to 12 Resisted Shoulder External and Internal Rotation External Rotation Shoulder Internal Rotation • Stand with your elbow to your side and hold onto a resistance band • External Rotation: take the resistance band and rotate the arm outwards • Internal Rotation: take the resistance band and rotate the arm towards your center • Gradually progress resistance, discontinue or decrease resistance if you feel shoulder irritation • Perform 3 sets 10 to 15 reps Other typical exercises performed during weeks 8-12 • Bicep curls • Triceps extension • Wrist flexor/extensor curls • Resisted shoulder extension • Resisted cable row pulls • Wall slides • Resisted internal/external rotation at 90 degrees of shoulder abduction Shoulder Rehab 12 weeks post-op About 3 months or 12 weeks after surgery, patients should be able to raise their arm on their own and be able to lift lightweight objects up to 5 pounds. Exercises past the 12 weeks should be gradually progressed with consideration of how the shoulder feels. Patients should still have routine follow-ups with a physical therapist to determine the intensity of the exercise. The strengthening program going forward should focus on movements for returning to job duties and previous active hobbies. Even if shoulder pain has mostly subsided, the tendons still need time to heal. Returning to Work After Rotator Cuff Repair Most rotator cuff repair patients will expect to be rested for several weeks. People who have a desk job may return to work sooner whereas a manual labor professional may be out for up to 3-6 months. Depending on the progression your surgeon may decide the appropriate time to return to work.