Indore
+917760547341

'loose'

Items tagged with 'loose'

HIP REPLACEMENT SURGEON IN INDORE

HIP REPLACEMENT SURGEON IN INDORE WHAT IS HIP REPLACEMENT SURGERY? Hip replacement surgery, also known as hip arthroplasty, is a surgical procedure in which a damaged or worn-out hip joint is removed and replaced with an artificial joint (prosthesis) made of metal, ceramic, or plastic. This is usually done to relieve severe pain, stiffness, and loss of mobility caused by conditions like osteoarthritis, rheumatoid arthritis, fractures, or avascular necrosis. The surgeon replaces the ball-and-socket parts of the hip joint: the head of the femur (thigh bone) and the hip socket (acetabulum). Hip replacement helps restore normal movement, reduce or eliminate pain, and significantly improve quality of life when other treatments like medication, physiotherapy, or lifestyle changes no longer work. MAIN CAUSES OF HIP REPLACEMENT 1. Osteoarthritis The most common reason. Caused by age-related wear and tear of the hip joint cartilage.Leads to pain, stiffness, and reduced mobility. 2. Rheumatoid Arthritis An autoimmune disease that causes chronic inflammation of the joints. It Destroys cartilage and bone, leading to severe joint damage and deformity. 3. Hip Fractures This is Especially common in older adults after falls. If the bone can't be repaired properly, hip replacement is often needed. 4. Avascular Necrosis (AVN) It Occurs when the blood supply to the hip bone is reduced, causing the bone to die and collapse. It Can be due to steroid use, alcohol abuse, trauma, or certain medical conditions. 5. Childhood Hip Diseases (e.g., Developmental Dysplasia, Perthes' disease) Improper hip development can cause long-term joint problems. These conditions may eventually lead to early joint damage and arthritis, requiring replacement in adulthood. TYPES OF HIP REPLACEMENT SURGERY 1. Total Hip Replacement (THR) – Most Common Both the ball (femoral head) and the socket (acetabulum) are replaced with artificial components. 2. Partial Hip Replacement (Hemiarthroplasty) In this surgery Only the femoral head (ball) is replaced and the socket is left as it is. 3. Hip Resurfacing In this surgery The femoral head is not removed, but instead it is reshaped and capped with a metal cover. The socket may still be replaced. 4. Revision Hip Replacement A repeat surgery is done when a previous hip replacement has failed or worn out. This is More complex and may involve replacing only part or maybe all components. It is Needed due to implant loosening, infection, fracture, or wear. WHO NEEDS HIP REPLACEMENT Hip replacement surgery is recommended for people who have severe hip joint damage that causes chronic pain, stiffness, and difficulty in movement, and does not improve with medicines. Who needs it : 1.People with Advanced Osteoarthritis 2.Patients with Rheumatoid Arthritis 3.Individuals with Avascular Necrosis (AVN) 4.People with Hip Fractures (Especially Elderly) 5.Those with Childhood Hip Disorders. Common signs that you may need hip replacement surgery : 1.Constant hip pain, even while resting 2.Stiffness and limited range of motion 3.Limping or difficulty standing/walking 4.No improvement with physiotherapy, medication, or injections. HOW IS HIP REPLACEMENT DONE? Hip replacement surgery is a procedure where a damaged hip joint is replaced with an artificial implant to relieve pain and restore movement. It usually takes 1.5 to 2 hours and is done under spinal or general anesthesia. How is it done? 1.Anesthesia The patient is given spinal anesthesia (numbs the body below the waist) or general anesthesia (makes you sleep during surgery). Sometimes a combination is used. 2. Incision A cut is made over the side, front, or back of the hip, depending on the approach used. Traditional approach: larger incision (20–30 cm) Minimally invasive: smaller incision (8–15 cm) 3. Removing the Damaged Bone The femoral head (ball part of the hip joint) is removed. The damaged cartilage and bone from the socket (acetabulum) are also cleaned out. 4. Inserting the Artificial Implants A metal or ceramic cup is placed into the hip socket. A metal stem is inserted into the thigh bone (femur), and a ball (metal or ceramic) is attached to the top. These parts together form the new artificial hip joint. 5. Fixing the Implants Implants may be cemented into place (common in older adults) or left uncemented, allowing bone to grow onto them Sometimes a combination of both methods is used. 6. Closing the Incision Muscles and tissues are repaired, and the skin is stitched or stapled. For more details on total hip replacement/ DAA total hip replacement, please visit our dedicated website for hip joint issues created by Dr Vikas jain- www.hipreplacementindia.in https://hipreplacementindia.in/treatment/bikini-hip-replacement/

Best Knee replacement Surgeon in Indore

Best Knee replacement Surgeon in Indore WHAT IS ARTHRITIS? Knee replacement surgery is mostly performed in the cases of arthritis. It is a general term for various conditions which can cause pain, swelling and stiffness in the joints. It can affect one or multiple joints in the body sometimes leading to complete damage of cartilage which leads to making the movement severely painful. Symptoms of Arthritis: 1. Joint pain 2. Swelling and warmth 3. Stiffness (especially in the morning) 4. Redness 5. Limited movement 6. Cracking or grinding sounds. WHAT IS KNEE REPLACEMENT? Knee replacement, also known as knee arthroplasty, is a surgical procedure where a damaged or worn-out knee joint is replaced with an artificial joint (implant). This artificial joint can be made of metal, plastic, or ceramic. It is usually done to relieve severe knee pain and improve movement when other treatments like medicines or physiotherapy doesn’t seem to work or provide relief. TYPES OF KNEE REPLACEMENT There are 4 main types of knee replacement surgeries, each chosen on the basis of how damage the knee is and the patient's age, activity level, and overall health. 1. TOTAL KNEE REPLACEMENT SURGERY (TKR) As the name suggests total knee replacement surgery is the type of surgery which replaces the complete knee of the patient. In this surgery entire knee is replaced including both sides if the knee ( femur and tibia) and sometimes even the knee cap ( patella). This surgery is generally suitable for the people going through severe arthritis as it provides long term relief and generally the recovery of 2-3 months. Most people above 60 with arthritis are advised with Total knee replacement surgery. 2. PARTIAL KNEE REPLACEMENT SURGERY (PKR) As the name is self explanatory, partial knee replacement unlike total knee replacement replaces only one part of the knee. It can either be any of the two sides of the knee or the frontal part. It is recovered fast as compared to total knee surgery and is less invasive. It is usually done in early stages of arthritis. 3. BILATERAL KNEE REPLACEMENT In bilateral knee surgery both knees are replaced on the same day or in the single surgery. It is suitable if both knees are severely affected and you are medically unfit and in alarming need if both knee replacements. The recovery is intense as compared to the prior two surgeries as both the knees are replaced. REVISION KNEE REPLACEMENT A repeat surgery done when an old knee implant wears out, loosens, or gets infected. It is more complex than the first surgery. It is Usually needed after 15–20 years of the first replacement (or earlier if complications arise). SIGNS THAT YOU NEED KNEE REPLACEMENT: Knee replacement surgery is generally required when the non surgical treatment can’t seem to relieve the pain any longer. 1. Severe knee pain. 2. ⁠Advanced Arthritis 3. ⁠Joint Stiffness and limited range of motion 4. ⁠Swelling and inflammation doesn’t just go away 5. ⁠Failed non surgical treatments 6. ⁠Poor quality of life like difficulty in performing day to day activities like walking. 7. ⁠Deformity or structural instability. Knee visibly looks crooked. 8. ⁠post traumatic Arthritis. For more details on total knee replacement/ robotic total knee replacement, please visit our dedicated website for knee issues created by Dr Vikas jain- www.tkasurgery.com https://tkasurgery.com/robotic-total-knee-replacement-surgery/

Shoulder Arthroscopy- Frozen Shoulder Release

Shoulder Arthroscopy- Frozen Shoulder Release Frozen shoulder, also called adhesive capsulitis is a condition characterized by pain and loss of motion in shoulder joint. Frozen shoulder release is extremely useful in cases of frozen shoulder that do not respond to therapy and rehabilitation. The aim of the surgery is to decrease pain, reduce the recovery time and help to gain full range of movement. Arthroscopic capsular release and manipulation under anesthesia (MUA) are the surgical procedures performed to treat the frozen shoulder. PRE-OPERATIVE STEPS Every effort is made to assess the patient prior to surgery in order to ensure safety of the patient for the elective procedure. 1. After admission, routine blood work-up will be done prior to surgery. Depending on the age of the patient and other premorbid conditions, other investigations such as Echocardiography may be performed. 2. All the investigations prior to surgery are performed in order to ensure that the surgical procedure can be safely tolerated by the patient, since shoulder arthroscopy is an elective procedure. If any risk is involved, the patient/ attendants will be informed so. 3. Blood transfusion though rarely required, may be done depending on the reports. 4. X-rays and/or MRI may be done depending on the surgeon’s choice and the surgical indication. 5. Surgical consent will be explained to the patient detailing the procedure as well as the risks involved, if any. INTRA-OPERATIVE STEPS A manipulation under anesthesia (MUA) is most commonly indicated in patients with simple frozen shoulder. This procedure is performed with the patient sedated under anesthesia. Your surgeon moves the shoulder through a range of motion which causes the capsule and scar tissue to stretch or tear. Thus the tight capsule is released allowing increased range of motion. The procedure involves freeing the shoulder by manipulation and does not involve any incisions. Arthroscopic capsular release is a keyhole surgery that involves the release of the tight, constricted capsule. It is an effective treatment for most people with stiff shoulder after injury, trauma, or fracture, and diabetes. 1. During the procedure 2 to 3 small incision holes are made in the shoulder in the front and the back. 2. The thickened, swollen abnormal capsule tissue is cut and removed using a special radiofrequency thermal probe with adequate precautions to not damage the normal tissue. 3. Once adequate capsular release is achieved, wound is closed and dressing applied. 4. Once again the shoulder movements are checked to ensure adequate shoulder release. POST-OPERATIVE MANAGEMENT Following Capsular release, immediate rehabilitation is necessary to prevent the recurrence of Frozen Shoulder. The aim of the rehabilitation is to reduce pain and to restore full range of motion. • Pain medications are recommended to control pain • Following these procedures, though much easier than the pre-operative phase, aggressive regular exercises need to be done in order to maintain full range of motion for 1 week- 1 month. • If you feel comfortable and have good range of movement, you can begin driving 1 week after your surgery. • Returning to work depends on the nature of your work. If you are in a sedentary job you may be able to return as early as 1 week after surgery • But if your job requires heavy lifting or using your arm at shoulder height, it may take longer time to return to your work. • Full range of motion is achieved at 4 – 6 weeks once the swelling is reduced.

Revision Knee Replacement Surgery

INTRODUCTION A revision knee replacement surgery is a procedure that is performed to replace a knee implant that is no longer functioning properly. Most knee replacements last several decades, some longer. However, there are also times when a knee replacement needs to be redone after years or even just months. Understanding why a knee replacement has worn out is critical to performing a successful revision knee replacement. The average knee replacement lasts more than two decades, and there are reports of implants lasting longer, and new materials and surgical techniques are hoped to provide even longer-lasting knee replacements. That said, there are times when knee replacements may last a very short time, even in otherwise healthy patients. A small percentage of patients (around 1-2%) end up requiring a knee replacement revised within a few years of their initial surgery. Revision replacements are performed for a number of reasons. Some of the more common include: Loosening of the implant Infection of the joint Instability of the knee Malalignment of the components Many people ultimately have a revision knee replacement because the problem is causing significant pain. While pain can be a problem in itself, a revision knee replacement surgery should not be performed without understanding why the pain is occurring. Performing this type of surgery for pain without an identified cause is unlikely to yield good results. Instead, the cause of the problem with the knee replacement needs to be precisely understood, and there needs to be a plan to address that problem with the implant. An operation without a clear plan to address the problem is unlikely to be helpful. Complexity in revision surgeries Revision replacement is difficult for several reasons. First, when someone has had surgery, scar tissue develops, and soft tissues become less identifiable. Performing the second surgery is always more difficult. Second, when performing a knee replacement, bone is removed. When performing a revision knee, often more bone has to be removed, and some may be lost as a result of the problem with the implant. Maintaining adequate bone to support the new implant can be a challenge. Finally, obtaining a knee that is flexible enough to allow for motion, yet stable enough to keep you steady, is also more difficult in revision situations. PRE-OPERATIVE PHASE Your surgeon will send you for routine blood tests to rule out infection, CT scan to look closer at the anatomy, and bone scans to help to determine if a component is loose. X-rays and/or MRI will be considered. Aspiration of the knee joint is occasionally done to diagnose or rule out infection Patient will be asked to undertake a general medical check-up with a physician Patient should have any other medical, surgical or dental problems attended to prior to the surgery in order to prevent a risk of infection. Cease aspirin or anti-inflammatory medications 10 days prior to surgery as they can cause bleeding. Any antiplatelet drugs / blood thinners such as clopidogrel, warfarin will be stopped 3-7 days prior to the date of surgery. Surgical consent will be explained to the patient detailing the procedure as well as the risks involved, if any. Blood transfusion, if required will be informed and done. Day of surgery You will meet the nurses and answer some questions for the hospital records You will meet your anesthetist, who will ask you a few questions and assess the risk factors for surgery. You will be given hospital clothes to change into and have a shower prior to surgery The operation site will be shaved and cleaned Approximately 45 minutes prior to surgery, you will be transferred to the operating room After explanation of the procedure, you will be asked to sign the consent for surgery. Occasionally, a high risk consent for surgery may be requested depending on the blood reports and clinical examination. SURGICAL PROCEDURE Each knee is individual and knee replacements take this into account by having different sizes for your knee. If there is more than the usual amount of bone loss, sometimes extra pieces of metal or bone are added. Surgery is performed under sterile conditions in the operating room under spinal or general anesthesia. You will be on your back and a tourniquet will be applied to your upper thigh to reduce blood loss. Surgery takes approximately two hours. The patient is positioned on the operating table and the leg prepped and draped. A tourniquet is applied to the upper thigh and the leg is prepared for the surgery with a sterilizing solution. An incision around 7cm is made to expose the knee joint. Old/ damaged components of the implants are removed. The bone ends of the femur and tibia are prepared using a saw or a burr to freshen the bone. Trial components are then inserted to make sure they fit properly. The real components (Femoral & Tibial) are then put into place with or without cement. The knee is then carefully closed and drains usually inserted, and the knee dressed and bandaged. POST- OPERATIVE MANAGEMENT When you wake up you will be in the recovery room with intravenous drips in your arm, a tube (catheter) in your bladder may be inserted, and a number of other monitors to check your vitals. Once stable, you will be taken to the ward. The postop protocol is surgeon dependent, but in general your drain will come out at 24 hours and you will sit out of bed and start moving your knee and walking on it within a day or two of surgery. The dressing will be reduced usually on the second postop day to make movement easier. Your rehabilitation and mobilization will be supervised by a physical therapist. To avoid lung congestion, it is important to breathe deeply and cough up any phlegm you may have. Your surgeon will use one or more measures to minimize blood clots in your legs, such as inflatable leg coverings, stockings, and injections to thin the blood clots or DVT’s. A lot of the long-term results of knee replacements depend on how much work you put into it following your operation. Usually you will be in hospital for 3-5 days and then either go home or to a rehabilitation facility depending on your needs. You will need physical therapy on your knee following surgery. You will be discharged on a walker or crutches and usually progress to a cane at six weeks. Your sutures will be removed at approximately 12-15 days. Bending your knee is variable, but by 6 weeks it should bend to 90 degrees. The goal is to get 110-115 degrees of movement. Once the wound is healed, you may shower. You can drive at about 6 weeks, once you have regained control of your leg. You should be walking reasonably comfortably by 6 weeks. More physical activities, such as sports may take 3 months to be able to do comfortably. You will usually have a 6-week checkup with your surgeon who will assess your progress. You should continue to see your surgeon for the rest of your life to check your knee and take X-rays. This is important as sometimes your knee can feel excellent but there can be a problem only recognized on X-ray. You are always at risk of infections especially with any dental work or other surgical procedures where germs (bacteria) can get into the blood stream and find their way to your knee. If you ever have any unexplained pain, swelling, redness or if you feel unwell you should see your doctor as soon as possible. A Revision Knee replacement is a complex procedure and requires a highly skilled surgeon with adequate expertise. Our Consultant in chief, Dr Vikas Jain is one of the few surgeons in the region who is trained from Europe and has adequate surgical experience in such complex revision procedures.

Shoulder Arthroscopy- Dislocation Bankarts Repair Surgery

Shoulder Arthroscopy- Dislocation Bankarts Repair Surgery To better understand what shoulder dislocation is, an overview of the shoulder is needed. The humeral head (ball of the shoulder joint) is centered in the glenoid (the socket of the joint), which stabilizes the shoulder. If the shoulder becomes dislocated, it can tear the glenoid labrum and ligaments that help reinforce its structure. Bankarts repair surgery is a minimally invasive surgery to repair instability and restore function of dislocated shoulders. The goal of Bankart repair surgery is to re-attach the torn labrum and ligaments to the tip of glenoid from which they were detached. Symptoms of Bankart tear or lesions are: • Severe shoulder pain • Shoulder dislocation, single or multiple episode. • Repeated instances where the shoulders give out during activity • Sensation of the shoulder feeling loose, slipping out of the joint or “hanging there” PRE-OPERATIVE STEPS Every effort is made to assess the patient prior to surgery in order to ensure safety of the patient for the elective procedure. 1. After admission, routine blood work-up will be done prior to surgery. Depending on the age of the patient and other premorbid conditions, other investigations such as Echocardiography may be performed in elderly patients. 2. All the investigations prior to surgery are performed in order to ensure that the surgical procedure can be safely tolerated by the patient, since shoulder arthroscopy is an elective procedure. If any risk is involved, the patient/ attendants will be informed so. 3. Blood transfusion though rarely required, may be done depending on the reports. 4. X-rays and/or MRI may be done depending on the surgeon’s choice and the surgical indication. 5. Surgical consent will be explained to the patient detailing the procedure as well as the risks involved, if any. INTRA OPERATIVE STEPS 1. After anesthesia induction and patient positioning your surgeon will make two small incisions in the front and one small incision in the back of the shoulder. 2. The surgery is considered minimally invasive thanks to the small incisions resulting in less discomfort and shorter recovery time. 3. The surgery is performed using a small fiberoptic camera (an arthroscope) and other small instruments. 4. The labrum tissue which is attached due to fibrosis at abnormal position (after shoulder dislocation) is released from the underlying glenoid. 5. Small holes are drilled near the detached labrum, once it has been cleared of loose particles. 6. The surgeon will then attach sutures to the released labrum and pull them tightly across the anchors so the labrum can be reattached to the glenoid. 7. Once the ligaments are firmly in place, the incisions are then closed with small bandages and the surgery is complete. POST OPERATIVE STEPS The first few days following surgery may be painful, but is typically managed by minimal amounts of pain medication. Seven to 10 days after the surgery, patients should have a follow-up with their surgeon.. Physical therapy helps to improve physical strength, range of motion, and assists with normal activities of daily living. 1. After surgery the arm is placed in a sling immobilizer. The sling is worn for at least the first two weeks after the operation. It should be removed when bathing/showering, or to do exercises. The sling is worn to sleep, and when in big crowds for at least four weeks after surgery. 2. Physical therapy should begin 7 to 10 days after surgery. Your surgeon will guide you through the exercises required after the surgery. The exercises are necessary to strengthen the muscles around the shoulder joint. 3. 1-2 week: passive shoulder motion and passive/active elbow motion 4. 2-8 weeks: active-assisted range of motion 5. 8-12 weeks: isometric rotator cuff strengthening 6. 3-6 months: sports- and work-related exercises 7. Return to sport: conditioning at 12 weeks but full return to contact sports at 6 months For the first four to six weeks following surgery, the focus should be on rehabilitation and regaining as much range of motion as possible (keeping surgical repair in mind). Depending on the progress of the patient, the next four to six weeks the focus will be on increasing the strength of the shoulder. As the strength of the shoulder improves any pain should decrease. Patients should visit their physical therapist six-eight times over a period of 12 weeks. Depending on the recovery, a patient can return to normal activity within a short period.

Knee Arthroscopy -Meniscectomy

Knee arthroscopy, keyhole surgery, is a technique used to inspect the inside of the joint cavity to diagnose and assess damage and, where possible, to treat this damage. Arthroscopic knee surgery involves putting a small telescope and special instruments into the knee, with the ability to photograph and video the operation. At the same time all of the other structures within the knee can be clearly viewed and probed. . Arthroscopic knee surgery is used to treat any number of conditions that occur within the knee from simple cartilage tears to removal of loose bodies, meniscal surgeries and anterior/ posterior cruciate ligament reconstructions. The meniscus is a piece of cartilage that provides cushion between the Femur (thigh bone) and Tibia (shin bone). In many ways, meniscus acts as shock-absorbers of the knee joint. They can be damaged or torn during activities that put pressure on or rotate the knee joint. If a meniscus is torn, it is ideal to get it repaired at the earliest since neglected meniscal damage leads to onset of osteoarthritis of the knee. WHAT IS DONE? The entire procedure is done with the help of 2-3 small keyhole sized incisions from which the instruments and the small laser/telescopic camera is inserted and the procedure is visualized on a high definition screen. Arthroscopic Meniscectomy: A minor surgery where the torn part of the damaged meniscus is removed and the remaining part of the meniscus is smoothened/ balanced in order to prevent any further damage to knee cartilage and ensure smooth functioning of the joint. Arthroscopic Meniscal repair: Depending on the pattern, some of the meniscal tears can be repaired. The torn portion of the meniscus is repaired with the help of specialized meniscal sutures. PRE-OPERATIVE STEPS Though the procedure is a very minor procedure, every effort is made to assess the patient prior to surgery in order to ensure safety of the patient for the elective procedure. 1. After admission, routine blood work-up will be done prior to surgery. Depending on the age of the patient and other premorbid conditions, other investigations such as Echocardiography may be performed. 2. All the investigations prior to surgery are performed in order to ensure that the surgical procedure can be safely tolerated by the patient, since it is an elective procedure. If any risk is involved, the patient/ attendants will be informed so. 3. X-rays and MRI may be done depending on the surgeon’s choice and the surgical indication for the procedure. 4. Surgical consent will be explained to the patient detailing the procedure as well as the risks involved, if any. INTRA-OPERATIVE STEPS- MENISCAL REPAIR/ MENISCECTOMY A meniscal injury is most commonly associated with another ligamental injury, though it is not uncommon to find an isolated meniscal injury. Meniscal tears are majorly of 2 types repairable and irreparable. Depending on the type of pattern two procedures which are performed commonly are described. 1. 2-3 small key hole incisions are made on the front aspect of the knee. 2. A small 1 mm Arthroscopic Camera is inserted into the knee joint to visualize the torn meniscus. 3. If the meniscus part is damaged and irreparable, a Debrider is inserted into the joint to remove the damaged portion of the meniscus and remaining part is smoothly balanced. The meniscectomy is complete. 4. If the Meniscus part which is torn is radial in shape or is large, an attempt is made to perform the meniscal repair. 5. An all inside suture with needle is inserted into the joint and is released after obtaining a hold in both the cut ends of the torn meniscus. 6. After checking that the torn portions are again in continuity, meniscal repair is complete. 7. Wound is closed with 2 or 3 small sutures followed by dressing. POST-OPERATIVE MANAGEMENT/ REHABILITATION Meniscectomy- patient is allowed to resume all the daily activities from the next day itself including full weight bearing. Patient needs to follow up for suture removal at 10th day after surgery Meniscal repair- patient is advised to continue non-weight bearing for a period of 6 weeks in order to allow for the torn meniscus to heal adequately.

Key Hole Surgery (Hip Arthroscopy) for Hip Pain

Hip Arthroscopy Arthroscopy, also referred to as keyhole or minimally invasive surgery, is a procedure in which an arthroscope is inserted into a joint to check for any damage and repair it simultaneously. An arthroscope is a small, fibre-optic instrument consisting of a lens, light source, and video camera. The camera projects an image of the inside of the joint onto a large screen monitor allowing the surgeon to look for any damage, assess the type of injury, and repair the problem. Hip arthroscopy is a surgical procedure performed through very small incisions to diagnose and treat various hip conditions including: Removal of torn cartilage or bone chips that cause hip pain and immobility. Repair a torn labrum: The labrum is a fibrous cartilage ring which lines the acetabular socket. Removal of bone spurs or extra bone growths caused by arthritis or an injury. Removal of part of the inflamed synovium (lining of the joint) in patients with inflammatory arthritis. This procedure is called a partial synovectomy. Repair of fractures or torn ligaments caused by trauma. Evaluation and diagnosis of conditions with unexplained pain, swelling, or stiffness in the hip that does not respond to conservative treatment. Hip arthroscopy is performed under regional or general anaesthesia depending on you and your surgeon’s preference. Your surgeon will make 2 or 3 small incisions about 1/4 inch in length around the hip joint. Through one of the incisions an arthroscope is inserted. Along with it, a sterile solution is pumped into the joint to expand the joint area and create room for the surgeon to work. Surgical instruments will be inserted through other tiny incisions to treat the problem. The larger image on the television monitor allows the surgeon to visualize the joint directly to determine the extent of damage so that it can be surgically treated. After the surgery, the incisions are closed and covered with a bandage. The advantages of hip arthroscopy over the traditional open hip surgery include: Smaller incisions Minimal trauma to surrounding ligaments, muscles, and tissues Less pain Faster recovery Lower infection rate Less scarring Earlier mobilization Shorter hospital stay

Still searching for
loose?