JOINT REPLACEMENT SURGEON IN INDORE WHAT IS JOINT REPLACEMENT? Joint replacement as the name suggests is the replacement of the torn or damaged joint in the body of an individual. The damaged joint in the body is replaced by artificial joint (prosthesis) made of metal, plastic or ceramic. Joint replacement is most commonly done to relive joint pain that can be caused die to various reasons. Some of these reasons are as follows: 1.osteoarthritis 2.rheumatoid arthritis 3.joint injuries The joint replace surgery helps restore the mobility of the patients and give him back the old quality of life where he doesn’t have to struggle with day to day activities due to joint related issues. The joint replacement surgery is mostly performed when the medicines and physiotherapy can’t seem to relieve the pain of the patient. Common Joints Replaced: 1.Knee (most common) 2.Hip 3.Shoulder 4.Elbow 5.Ankle TYPES OF JOINT REPLACEMENT 1. Knee Replacement Total Knee Replacement (TKR): Entire knee joint is replaced — both sides of the joint and the kneecap. Partial Knee Replacement (PKR): Only one part (inner, outer, or kneecap area) of the knee is replaced. Revision Knee Replacement: Done if the first knee implant wears out or fails. 2. Hip Replacement 3. ⁠Total Hip Replacement (THR): Both the ball (femoral head) and socket (acetabulum) are replaced. Partial Hip Replacement (Hemiarthroplasty): Only the ball of the hip joint is replaced. Hip Resurfacing: Bone is preserved by capping the ball instead of replacing it. Revision Hip Replacement: Second surgery if the first implant fails. 3. Shoulder Replacement Total Shoulder Replacement: Both the ball (humeral head) and socket (glenoid) are replaced. Partial Shoulder Replacement (Hemiarthroplasty): Only the ball part is replaced. Reverse Shoulder Replacement: Used in cases of rotator cuff damage or failed previous surgeries — ball and socket positions are reversed. 4. Elbow Replacement Replaces the damaged parts of the elbow joint with metal and plastic components. Mostly done for rheumatoid arthritis or complex fractures. 5. Ankle Replacement Less common than other joint replacements. Used in advanced arthritis or post-injury damage when movement is severely limited. SIGNS THAT ONE IS IN NEED OF JOINT REPLACEMENT: Joint replacement is usually considered when joint damage severely affects your daily life, and other treatments like medicines, physiotherapy, or injections no longer help. Here are the key signs that someone might need a joint replacement (knee, hip, shoulder, etc.): 1. Persistent Joint Pain Constant or severe pain that doesn’t go away, even with rest or medication. Pain that wakes you up at night or limits your ability to sit, stand, or sleep. 2. Stiffness and Limited Movement Difficulty in bending, straightening, or rotating the joint. Trouble doing everyday activities like climbing stairs, walking, or lifting your arm. 3. Swelling and Inflammation Chronic swelling that doesn’t improve with rest, ice, or medicines. Signs of joint inflammation that come and go, or stay constantly. 4. Joint Deformity Visible changes like bowed legs, uneven leg length, or misalignment of the joint. The joint may appear “sunken,” twisted, or bulged. 5. Dependence on Painkillers or Walking Aids Needing pain medicines daily just to function. Using a walker, cane, or crutches regularly due to pain or weakness. 6. X-ray or MRI Shows Severe Damage Imaging shows bone-on-bone contact, joint space narrowing, cartilage loss, or joint collapse. Bone spurs, cysts, or joint erosion. 7. Failed Conservative Treatments No long-term relief from: Physiotherapy Joint injections Weight loss and lifestyle changes 8. Declining Quality of Life You avoid walking, traveling, or socializing because of joint pain. Pain interferes with work, hobbies, or mental health. ADVANTAGES OF JOINT REPLACEMENT SURGERY: 1.Pain Relief Significantly reduces or completely eliminates chronic joint pain. 2.Improved Mobility and Function Restores movement, making walking, climbing stairs, or daily tasks easier. 3.Better Quality of Life Helps you return to normal activities, work, and hobbies with greater independence. 4. Long-Lasting Results Modern implants can last 15–20 years or more, giving years of active, pain-free living. For more details on total hip replacement/ DAA total hip replacement, please visit our dedicated website for hip joint issues created by Dr Vikas jain- www.hipreplacementindia.in https://hipreplacementindia.in/treatment/bikini-hip-replacement/

Best Knee replacement Surgeon in Indore WHAT IS ARTHRITIS? Knee replacement surgery is mostly performed in the cases of arthritis. It is a general term for various conditions which can cause pain, swelling and stiffness in the joints. It can affect one or multiple joints in the body sometimes leading to complete damage of cartilage which leads to making the movement severely painful. Symptoms of Arthritis: 1. Joint pain 2. Swelling and warmth 3. Stiffness (especially in the morning) 4. Redness 5. Limited movement 6. Cracking or grinding sounds. WHAT IS KNEE REPLACEMENT? Knee replacement, also known as knee arthroplasty, is a surgical procedure where a damaged or worn-out knee joint is replaced with an artificial joint (implant). This artificial joint can be made of metal, plastic, or ceramic. It is usually done to relieve severe knee pain and improve movement when other treatments like medicines or physiotherapy doesn’t seem to work or provide relief. TYPES OF KNEE REPLACEMENT There are 4 main types of knee replacement surgeries, each chosen on the basis of how damage the knee is and the patient's age, activity level, and overall health. 1. TOTAL KNEE REPLACEMENT SURGERY (TKR) As the name suggests total knee replacement surgery is the type of surgery which replaces the complete knee of the patient. In this surgery entire knee is replaced including both sides if the knee ( femur and tibia) and sometimes even the knee cap ( patella). This surgery is generally suitable for the people going through severe arthritis as it provides long term relief and generally the recovery of 2-3 months. Most people above 60 with arthritis are advised with Total knee replacement surgery. 2. PARTIAL KNEE REPLACEMENT SURGERY (PKR) As the name is self explanatory, partial knee replacement unlike total knee replacement replaces only one part of the knee. It can either be any of the two sides of the knee or the frontal part. It is recovered fast as compared to total knee surgery and is less invasive. It is usually done in early stages of arthritis. 3. BILATERAL KNEE REPLACEMENT In bilateral knee surgery both knees are replaced on the same day or in the single surgery. It is suitable if both knees are severely affected and you are medically unfit and in alarming need if both knee replacements. The recovery is intense as compared to the prior two surgeries as both the knees are replaced. REVISION KNEE REPLACEMENT A repeat surgery done when an old knee implant wears out, loosens, or gets infected. It is more complex than the first surgery. It is Usually needed after 15–20 years of the first replacement (or earlier if complications arise). SIGNS THAT YOU NEED KNEE REPLACEMENT: Knee replacement surgery is generally required when the non surgical treatment can’t seem to relieve the pain any longer. 1. Severe knee pain. 2. ⁠Advanced Arthritis 3. ⁠Joint Stiffness and limited range of motion 4. ⁠Swelling and inflammation doesn’t just go away 5. ⁠Failed non surgical treatments 6. ⁠Poor quality of life like difficulty in performing day to day activities like walking. 7. ⁠Deformity or structural instability. Knee visibly looks crooked. 8. ⁠post traumatic Arthritis. For more details on total knee replacement/ robotic total knee replacement, please visit our dedicated website for knee issues created by Dr Vikas jain- www.tkasurgery.com https://tkasurgery.com/robotic-total-knee-replacement-surgery/

There are four different muscles that stabilize the ball and socket that make up the shoulder joint. These muscles are responsible for arm movement and shoulder stability. Through repeated heavy lifting, incorrect posture the tendons which attach muscles to bone may injure and tear. The muscles forming the part of the rotator cuff are Supraspinatus, Infraspinatus, Teres minor as well as Subscapularis, although the most common tear is of the tendon of Supraspinatus muscle. Torn Rotator Cuff Signs and symptoms include: • Pain and weakness with overhead movements • Pain with putting on and taking off clothes • Pain with reaching behind the back when showering • Pain with lying on the painful shoulder • Difficulty performing physical activity or even job duties It’s not uncommon for people with a rotator cuff tear to feel the following: • Increased pain in the shoulder with lifting or during overhead activities. • Inability to fully lift arm due to weakness of the shoulder muscles. • Pain in the shoulder at night, keeping them from sleeping • Pinching, catching, or popping sounds in the shoulder with movement • Restricted range of motion, especially with reaching behind the back or overhead Though most often rotator cuff tears are of traumatic origin, degenerative tears with increasing age are equally common and should be considered for repair too in symptomatic patients. Rotator cuff tendon tears are ultimately confirmed through Magnetic Resonance Imaging (MRI). A rotator cuff repair is a surgery to restore the muscle tendon attachment to the humeral head (the ball of the ball and socket shoulder joint). It is most often done today through an arthroscopic technique – small incisions around the shoulder. PRE-OPERATIVE STEPS Every effort is made to assess the patient prior to surgery in order to ensure safety of the patient for the elective procedure. 1. After admission, routine blood work-up will be done prior to surgery. Depending on the age of the patient and other premorbid conditions, other investigations such as Echocardiography may be performed in elderly patients. 2. All the investigations prior to surgery are performed in order to ensure that the surgical procedure can be safely tolerated by the patient, since shoulder arthroscopy is an elective procedure. If any risk is involved, the patient/ attendants will be informed so. 3. Blood transfusion though rarely required, may be done depending on the reports. 4. X-rays and MRI will be done ideally in order to guide the surgical plan and the prognosis. 5. Surgical consent will be explained to the patient detailing the procedure as well as the risks involved, if any. INTRA OPERATIVE STEPS 1. After anesthesia induction and patient positioning your surgeon will make two small incisions in the front and one small incision each in the back and the side of the shoulder joint. 2. The surgery is performed using a small fiberoptic camera (an arthroscope) and other small instruments inserted through the incisions. 3. The fatty tissue which is leading to symptoms of bursitis is removed along with a burr thinning of undersurface of the acromion bone is performed which is known to cause rotator cuff tears. 4. The remaining portion of the torn rotator cuff muscle tendon is mobilized after clear visualization through the arthroscope. 5. After mobilization, suture anchors are inserted into the underlying humerus bone. 6. The tendons are fixed to suture anchors with the help of a device known as Firstpass. 7. Once sufficient hold is obtained in the tendons, knots are applied in order to fix the tendon into the original insertion site on the bone. 8. Once the rotator cuff tendons are firmly in place, the incisions are then closed with small bandages and the surgery is complete. POST OPERATIVE STEPS After surgery, patients will take home a sling used to protect the arm and the newly repaired tendons. Patients need to wear the sling for the first 6 weeks even during sleep. Patients may take the sling off when bathing or performing physical therapy exercises. DON’Ts for the first 6 weeks: • Don’t lift your surgical arm overhead without help • Don’t reach behind your back • Don’t pick up any heavy objects with the surgical arm • Don’t push or pull any objects with the surgical arm • Don’t perform any chores or physical labor requiring the use of your surgical arm Pain Management after Shoulder Surgery Most patients with rotator cuff repair will have some level physical discomfort which is normal. The pain could be sharp when first attempting to move the arm. Most surgeons will prescribe medications which should be taken to reduce pain but the patient should continue with the rehabilitation program. Ice is helpful to reduce inflammation and improve pain in the initial recovery process. Place an ice pack or cold compress over the shoulder for up to 20 minutes several times a day especially when recovering the first few weeks. Some pain and inflammation are normal for routine healing. However, some things may be concerning and require further attention. Watch out for: • Active drainage or pus from the wound after 3 weeks, the incision sites should be closed by this point. • Swelling and stiffness in the hand/wrist/elbow – this may mean that you have some limited lymphatic drainage; try elevating the arm on some pillows when you sit and performing some hand/finger exercises • Severe unresolved pain in the shoulder joint after 6 weeks Rehabilitation after Rotator cuff repair Rotator Cuff Exercises for Weeks 1 – 6 Physical Therapy will be vital to facilitate recovery and provide the best guidance. For the first 6 weeks, patients need to refrain from any aggressive movement or weight lifting. Initial Physical Therapy sessions are very important for preventing injury and for gradual restoration of movement. In the first several sessions, the therapist will perform the arm movements for the patient (passive motion) so as not to strain any of the repaired muscles and tendons Pendulums • Brace against a supportive surface (like a kitchen counter or dining table) • Allow the surgical arm to hang down with just the weight of the arm • Move your body back by bending your knees until the arm begins to swing around passively • Go clockwise, then counterclockwise • Perform 2 sets of 20 repetitions Table Slides • Rest your hand and forearm on a towel placed in front of your dining table • Lean forward with your body and allow your arm to move forward until you feel a gentle stretch and hold at the end for 5 to 10 seconds • Keep your shoulders relaxed, do not shrug your shoulders • Perform 3 sets 10 reps Shoulder Flexion passive range of motion • Lie on your back • Using the strength of your non-surgical arm, bring your surgical arm overhead, hold at the end for 5 to 10 seconds • Keep your shoulders relaxed, do not shrug your shoulders • Perform 3 sets 10 reps Shoulder External Rotation passive range of motion • Lie on your back, with your surgical arm’s elbow by your side • Hold a lightweight stick with both hands • Using the strength of your non-surgical arm, rotate your surgical arm outwards into a gentle stretch • Hold at the end for 5 to 10 seconds • Keep your shoulders relaxed, and keep your elbow by your side • Perform 3 sets 10 reps Your physical therapist may also direct you to work on improving your wrist/elbow and grip strength. Rehab 6 to 12 weeks post-op Most patients will discontinue wearing the sling after week 4 to 6. This will also be the time in which patients will begin moving the arm, first with some help (therapists call this “active assisted” range of motion), then progressing independence with movement (“active”). Shoulder Exercise for Weeks 6 to 8 Active Assistive Exercises (Flexion, Abduction, External Rotation) The goal is to gradually get your surgical shoulder to move with support from your other arm. • With both hands, hold onto a stick • Using the help of the good arm, push your surgical hand: • Straight up and forward (flexion) • Up to the side (abduction) • With your elbow by your side, rotate the arm (external rotation) • When first starting, use your good arm to push most of the weight, then gradually do more with the surgical arm granted there is no pain • Perform 3 sets 10 reps holding for 5 seconds. Flexion with stick Abduction with Stick External Rotation with Stick Isometrics • With your elbow by your side, press a towel with your fist into the wall in each of these directions gradually until muscle activation is felt in the shoulder • Perform 3 sets 10 reps holding for 5 seconds Shoulder Exercises Week 8 to 12 Resisted Shoulder External and Internal Rotation External Rotation Shoulder Internal Rotation • Stand with your elbow to your side and hold onto a resistance band • External Rotation: take the resistance band and rotate the arm outwards • Internal Rotation: take the resistance band and rotate the arm towards your center • Gradually progress resistance, discontinue or decrease resistance if you feel shoulder irritation • Perform 3 sets 10 to 15 reps Other typical exercises performed during weeks 8-12 • Bicep curls • Triceps extension • Wrist flexor/extensor curls • Resisted shoulder extension • Resisted cable row pulls • Wall slides • Resisted internal/external rotation at 90 degrees of shoulder abduction Shoulder Rehab 12 weeks post-op About 3 months or 12 weeks after surgery, patients should be able to raise their arm on their own and be able to lift lightweight objects up to 5 pounds. Exercises past the 12 weeks should be gradually progressed with consideration of how the shoulder feels. Patients should still have routine follow-ups with a physical therapist to determine the intensity of the exercise. The strengthening program going forward should focus on movements for returning to job duties and previous active hobbies. Even if shoulder pain has mostly subsided, the tendons still need time to heal. Returning to Work After Rotator Cuff Repair Most rotator cuff repair patients will expect to be rested for several weeks. People who have a desk job may return to work sooner whereas a manual labor professional may be out for up to 3-6 months. Depending on the progression your surgeon may decide the appropriate time to return to work.

Knee arthroscopy, keyhole surgery, is a technique used to inspect the inside of the joint cavity to diagnose and assess damage and, where possible, to treat this damage. Arthroscopic knee surgery involves putting a small telescope and special instruments into the knee, with the ability to photograph and video the operation. At the same time all of the other structures within the knee can be clearly viewed and probed. . Arthroscopic knee surgery is used to treat any number of conditions that occur within the knee from simple cartilage tears to removal of loose bodies, meniscal surgeries and anterior/ posterior cruciate ligament reconstructions. The meniscus is a piece of cartilage that provides cushion between the Femur (thigh bone) and Tibia (shin bone). In many ways, meniscus acts as shock-absorbers of the knee joint. They can be damaged or torn during activities that put pressure on or rotate the knee joint. If a meniscus is torn, it is ideal to get it repaired at the earliest since neglected meniscal damage leads to onset of osteoarthritis of the knee. WHAT IS DONE? The entire procedure is done with the help of 2-3 small keyhole sized incisions from which the instruments and the small laser/telescopic camera is inserted and the procedure is visualized on a high definition screen. Arthroscopic Meniscectomy: A minor surgery where the torn part of the damaged meniscus is removed and the remaining part of the meniscus is smoothened/ balanced in order to prevent any further damage to knee cartilage and ensure smooth functioning of the joint. Arthroscopic Meniscal repair: Depending on the pattern, some of the meniscal tears can be repaired. The torn portion of the meniscus is repaired with the help of specialized meniscal sutures. PRE-OPERATIVE STEPS Though the procedure is a very minor procedure, every effort is made to assess the patient prior to surgery in order to ensure safety of the patient for the elective procedure. 1. After admission, routine blood work-up will be done prior to surgery. Depending on the age of the patient and other premorbid conditions, other investigations such as Echocardiography may be performed. 2. All the investigations prior to surgery are performed in order to ensure that the surgical procedure can be safely tolerated by the patient, since it is an elective procedure. If any risk is involved, the patient/ attendants will be informed so. 3. X-rays and MRI may be done depending on the surgeon’s choice and the surgical indication for the procedure. 4. Surgical consent will be explained to the patient detailing the procedure as well as the risks involved, if any. INTRA-OPERATIVE STEPS- MENISCAL REPAIR/ MENISCECTOMY A meniscal injury is most commonly associated with another ligamental injury, though it is not uncommon to find an isolated meniscal injury. Meniscal tears are majorly of 2 types repairable and irreparable. Depending on the type of pattern two procedures which are performed commonly are described. 1. 2-3 small key hole incisions are made on the front aspect of the knee. 2. A small 1 mm Arthroscopic Camera is inserted into the knee joint to visualize the torn meniscus. 3. If the meniscus part is damaged and irreparable, a Debrider is inserted into the joint to remove the damaged portion of the meniscus and remaining part is smoothly balanced. The meniscectomy is complete. 4. If the Meniscus part which is torn is radial in shape or is large, an attempt is made to perform the meniscal repair. 5. An all inside suture with needle is inserted into the joint and is released after obtaining a hold in both the cut ends of the torn meniscus. 6. After checking that the torn portions are again in continuity, meniscal repair is complete. 7. Wound is closed with 2 or 3 small sutures followed by dressing. POST-OPERATIVE MANAGEMENT/ REHABILITATION Meniscectomy- patient is allowed to resume all the daily activities from the next day itself including full weight bearing. Patient needs to follow up for suture removal at 10th day after surgery Meniscal repair- patient is advised to continue non-weight bearing for a period of 6 weeks in order to allow for the torn meniscus to heal adequately.

Hip Arthroscopy Arthroscopy, also referred to as keyhole or minimally invasive surgery, is a procedure in which an arthroscope is inserted into a joint to check for any damage and repair it simultaneously. An arthroscope is a small, fibre-optic instrument consisting of a lens, light source, and video camera. The camera projects an image of the inside of the joint onto a large screen monitor allowing the surgeon to look for any damage, assess the type of injury, and repair the problem. Hip arthroscopy is a surgical procedure performed through very small incisions to diagnose and treat various hip conditions including: Removal of torn cartilage or bone chips that cause hip pain and immobility. Repair a torn labrum: The labrum is a fibrous cartilage ring which lines the acetabular socket. Removal of bone spurs or extra bone growths caused by arthritis or an injury. Removal of part of the inflamed synovium (lining of the joint) in patients with inflammatory arthritis. This procedure is called a partial synovectomy. Repair of fractures or torn ligaments caused by trauma. Evaluation and diagnosis of conditions with unexplained pain, swelling, or stiffness in the hip that does not respond to conservative treatment. Hip arthroscopy is performed under regional or general anaesthesia depending on you and your surgeon’s preference. Your surgeon will make 2 or 3 small incisions about 1/4 inch in length around the hip joint. Through one of the incisions an arthroscope is inserted. Along with it, a sterile solution is pumped into the joint to expand the joint area and create room for the surgeon to work. Surgical instruments will be inserted through other tiny incisions to treat the problem. The larger image on the television monitor allows the surgeon to visualize the joint directly to determine the extent of damage so that it can be surgically treated. After the surgery, the incisions are closed and covered with a bandage. The advantages of hip arthroscopy over the traditional open hip surgery include: Smaller incisions Minimal trauma to surrounding ligaments, muscles, and tissues Less pain Faster recovery Lower infection rate Less scarring Earlier mobilization Shorter hospital stay

OVERVIEW Fractures (Broken Bones) of the thigh, knee and leg, are common from both minor and major accidents. These are incapacitating in the short term as they commonly require the use of crutches, casts and modifications of activities as well as time off work and driving restrictions. DESCRIPTION Lower limb fractures occur from either direct trauma or indirectly from forces applied to the limb (eg twisting injuries). The type of fracture depends on the size and direction of the injury to the limb. Condition Low energy injuries (such as falls from a standing height), usually result in less complex fracture patterns and less soft tissue injury. Typical symptoms of a fracture include: • Pain • Swelling • Deformity • Difficulty weight bearing/walking Lower energy injuries can be missed and may be passed off as ‘sprains’ or ‘strains’. If you have had an injury that is not responding to treatment, it is advisable to see your doctor and obtain X-Rays to rule out an occult fracture. Higher energy injuries (such as motorcycle and car crashes) typically fracture bones in multiple places, into smaller pieces, and commonly disrupt the soft tissues resulting in large amounts of bruising and swelling. These can be challenging to treat and frequently require surgery to restore the bones to their anatomical position to make healing quicker and your function better in the long term. TREATMENT The treatment of lower limb fractures requires careful tailoring to the individual patients demand and the type of fracture sustained. Non-operative treatment of lower limb fractures may involve: • Crutches • Braces • Plaster Casts • Orthotic Shoes • Activity Restriction • Physiotherapy Dr. Jain always encourages non-operative treatment whenever possible ,however many fractures do much better with surgical intervention as surgery can speed up recovery and improve the short and long term outcome. As there many different types of lower limb fractures, there are a large range of surgical options that can be used, these can include: • Plates + screws • Wires • Rods/Nails • External Fixators Sometimes a combination of these is used, and Dr. Jain will discuss the surgical plan with you pre-operatively. He uses the latest technology in minimally invasive percutaneous orthopedic trauma implants, to give you the best outcome possible with the least amount of scarring and soft tissue injury. After surgery, Dr. Jain will discuss your operation as well as plan your rehabilitation in line with your goals and expectations. He uses a highly qualified team of physiotherapists and rehabilitation specialists to get you back to your activities as quickly as possible. Dr. Jain has extensive experience treating fractures, he has completed Training at Cascais Hospital in Lisbon (Portugal, Europe) with world recognized leaders in Orthopedic Trauma Surgery, and has worked as an Orthopedic Joint Replacement & Trauma Consultant at Tata Hospitals. He routinely attends conferences and visits trauma centers worldwide to refine his skills and stay on top of the most recent advances in trauma surgery. He is also actively involved in various trauma research projects and regularly teaches junior doctors.